Alloy Steel Sncm439 4340

4340 Steel | 36CrNiMo4 | 1.6511 | EN24 | SNCM439 - Otai ...

AISI 4340 steel is a medium carbon, low alloy steel known for its toughness and strength in relatively large sections. AISI 4340 is also one kind of nickel chromium molybdenum steels. 4340 alloy steel is generally supplied hardened and tempered in the tensile range of 930 – 1080 Mpa.

SAE-AISI 4340 (SNCM439, G43400) Ni-Cr-Mo Steel ...

SAE-AISI 4340 (SNCM439, G43400) Ni-Cr-Mo Steel SAE-AISI 4340 steel is an alloy steel formulated for primary forming into wrought products. 4340 is the designation in …

AISI 4340 Alloy Steel-SAE UNS G43400 steel - OTAI Special ...

4340 steel properties is very similar with GB 40CrNiMo steel, JIS SNCM439 and DIN 1.6511 36CrNiMo4 Alloy structural steel. At most work environment,4340 is equivalent with 40CrNiMo, 1.6511 36CrNiMo4, SNCM439 steel.

Normalized SAE-AISI 4140 vs. SAE-AISI 4340 Steel ...

Both normalized SAE-AISI 4140 and SAE-AISI 4340 steel are iron alloys. They have a very high 98% of their average alloy composition in common. For each property being compared, the top bar is normalized SAE-AISI 4140 and the bottom bar is SAE-AISI 4340 steel.

AISI 4340 Steel | 36CrNiMo4 | 1.6511 | EN24 | 817M40 ...

AISI 4340 is also one kind ofnickel chromium molybdenum steels. 4340 alloy steel is generallysupplied hardened and tempered in the tensile range of 930 – 1080 Mpa.Pre hardened and tempered 4340 steels can be further surface hardened by flame or induction hardening and by nitriding.[PDF]

4340 Alloy Steel | 1.6511 | 36CrNiMo4 | 40NCD3 | …

AISI 4340 Steel is a Alloy Structural Steel belong to ASTM A29/A29M Steel Grade standard. AISI 4340 used in Oil and Gas industry and Large Machinery Strutural. 4340 Steel China Supplier and factory Otai Special Steel Supply 4340 steel in Round bar, Plate, Flat bar,

AISI/SAE 4340 Alloy Steel- 4340 Steel Properties | All ...

AISI/SAE 4340 Alloy Steel, 4340, is a nickel-chromium-molybdenum alloy steel known for its toughness and its ability to attain high strengths in the heat-treated condition. Commercial and military aircraft, automotive systems, forged hydraulic and other machine tool applications, forged steel …

BS 970, for Mechanical and Allied Engineering Steel

BS 970 standard is one steel specification for wrought steel for mechanical and allied engineering purposes. It specifies requirements for carbon and carbon manganese, alloy, free-cutting and stainless steels normally supplied in the bright cold finished condition.

aisi 4340 alloy steel pipe, View aisi 4340 alloy steel ...

Steel Grade:AISI 4340/4340H,SNCM439/DIN 41CrNiMo4 Application : Used as high strength, high toughness, section size larger and more important conditioning parts requirements, such as the horizontal forging machine drive the eccentric shaft, crankshaft forging machine.

Tool Steel Manufacturer, Alloy Steel Manufacturer, Die ...

We are Tool Steel Manufacturer, Alloy Steel Manufacturer, Die Steel Manufacturer, Carbon Steel Manufacturer. We are specializing in high quality of special steel. Over 50,000 tons of running stock and all-round services including machining, heat treatment, QC and technical consultation. ... 34CrNiMo6 / 4340 / SNCM439 Alloy Steel Bar. DIN 1.2343 ...

SAE 4340 Alloy Steel Round Bar | 34CrNiMo6 Bar | ssroundbar

SAE 4340 Alloy Steel Round Bar is very resistant to corrosion and is used for this purpose in industry, SAE 4340 Alloy Steel Round Bar is widely used for plating steel components. SAE 4340 Alloy Steel Round Bar is a most useful material but it is very expensive

4340 Steel | Hardened Steel | Malaysia Alloy Steel ...

4340 is a 1.8% nickel – chromium – molybdenum high hardenability high tensile steel – generally supplied hardened and tempered in the tensile range of 930 – 1080 Mpa (condition U) – (Rc 28 – 36).

alloy steel shaft …

4340 is a 1.8% nickel - chromium - molybdenum high hardenability high tensile steel - generally supplied hardened and tempered in the tensile range of 930 - 1080 Mpa (condition U) - (Rc 28 - 36). Characterised by high strength and toughness in relatively large sections.

Engineering Structural Steel-Alloy structural steel-China ...

aisi/sae 4340 is a high strength alloy structural steel material grade. It has high strength, toughness and excellent hardenability and anti-overheating stability, but the white point of …

4340 Steel | Hardened Steel | Malaysia Alloy Steel ...

4340 is a 1.8% nickel – chromium – molybdenum high hardenability high tensile steel – generally supplied hardened and tempered in the tensile range of 930 – 1080 Mpa (condition U) – (Rc 28 – 36).

SNCM439 Alloy Steel Supply from Taiwan - JFS Steel | steel ...

Alloy Steel. Equivalent Grades: GB 40CrNiMoA, 45CrNiMoVA, JIS SNCM439, and ASTM 4340, 9840. SNCM439 is a kind of refining steel and has the properties of high hardness and toughness.

alloy steel shaft 4340/40CrNiMoA/34CrNiMo6/1.6565/SNCM439 …

4340 is a 1.8% nickel - chromium - molybdenum high hardenability high tensile steel - generally supplied hardened and tempered in the tensile range of 930 - 1080 Mpa (condition U) - (Rc 28 - 36). Characterised by high strength and toughness in relatively large sections.

SAE 4340 Alloy Steel Round Bar | 34CrNiMo6 Bar | …

SAE 4340 Alloy Steel Round Bar is very resistant to corrosion and is used for this purpose in industry, SAE 4340 Alloy Steel Round Bar is widely used for plating steel components. SAE 4340 Alloy Steel Round Bar is a most useful material but it is very expensive

Engineering Structural Steel-Alloy structural steel-China ...

aisi/sae 4340 is a high strength alloy structural steel material grade. It has high strength, toughness and excellent hardenability and anti-overheating stability, but the white point of …

The Corresponding Of 40CrNiMoA, 4340 And SNCM439

Chrome-Moly low alloy steel series contains 0.5% - 9% Cr and 0.5% - 1% Mo and lower than 0.20% carbon. 40CrNiMoA, 4340 and SNCM439 are the low alloy chromoly steel materials from the different standards. 40CrNiMoA steel is a Chinese standard chromium-molybdenum high strength steel with good hardenability and toughness. 4340 and SNCM439 are ...

1.6511 36CrNiMo4 4340 EN24 817M40 SNCM439 Alloy Steel …

1.6511 36CrNiMo4 4340 EN24 817M40 SNCM439 Alloy Steel Tubes for Mechanical Purpose

HR 4340 ALLOY BAR In Stock - Alloy Steel Pipe Dimensions

AISI 4340/JIS SNCM439 Alloy Steel Bar. Reliant Pipe (Iso Certified ) Alloy Steel 4340 Bar Suppliers in India | Check 4340 Round Bar Price List India, 4340 bar Stockist in Mumbai, Bengaluru, Chennai, USA, UK, Houston, Dubai, Seoul, Hyderabad, Abu Dhabi,canada,singapore,Ahmedabad, Tehran,south africa,houston,Riyadh,Vadodara,London,Coimbatore,Jakarta,Istanbul,Bangkok, Kuwait City, uae, 4340 alloy ...

High Tensile AISI 4340 Alloy Steel Bar Manufacturer ...

Suppling High Tensile AISI 4340 Alloy Steel Bar. AISI 4340 is a Nickel Chromoly high hardened and tempered steel with high hardness and toughness.It was used where require high tensile and good wear-resistance property parts such as screw, gear, shaft head, nut, piston or car parts.

Alloy steel bar 40CrNiMo - 40CrNiMo/AISI 4340 8620 …

Buy Alloy steel bar 40CrNiMo 40CrNiMo/AISI 4340 8620 8640 4320 , JIS SNCM8 GB: from Metal B2B, Alloy steel bar 40CrNiMo features: 1.Alloy steel bar 40CrNiMo., 2.High strength, toughness and good resistance, is stability of its quench-hardening ability .

4340 Alloy Steel Round Bar - stainless steel sheets ...

4340 34CrNiMo6 Alloy steel round bar of yagangsteel. Alloy steel for sale, new 4340 34CrNiMo6 Alloy steel round bar of DONGGUAN YAGANG METAL MATERIALS CO.,LTD from China.

AISI 4340 Alloy Steel (UNS G43400) - AZoM

Alloy steels are designated by AISI four-digit numbers. They comprise different kinds of steels having composition exceeding the limitations of B, C, Mn, Mo, Ni, Si, Cr, and Va set for carbon steels. AISI 4340 alloy steel is a heat treatable and low alloy steel containing chromium, nickel and ...

SNCM439 35NCD6 38Ch2N2MA EN24 817M40 DIN1.6582 …

Description. 4340 Steel is a heat treatable, low alloy steel containing nickel, chromium and molybdenum. It is known for its toughness and capability of developing high strength in the heat treated condition while retaining good fatigue strength.[PDF]

4340 HIGH TENSILE STEEL - interlloy.au

4340 is a 1.8% nickel - chromium - molybdenum high hardenability high tensile steel - generally supplied hardened and tempered in the tensile range of 930 - 1080 Mpa (condition U) - (Rc 28 - 36).. Characterised by high strength and toughness in relatively large sections.

Hot Products

We are here to serve you!

Reply to technical consultation Provide design solution Dispatch engineers domestically/abroad Handle complaints thoroughly Systematic training Trouble judgment &amo; removal