steel 34crnimo6

1.6582 / 34CrNiMo6 Steel - Alloy Engineering Steel | Steel Bar

1.6582 / 34CrNiMo6. DIN 1.6582 / 34CrNiMo6 Steel is an important alloy engineering steel grade as per DIN Germany standard. It has high strength,high toughness and good hardenability. DIN 1.6582 steel has the stability of resistance to overheating,but the white sensitivity of 34CrNiMo6 is high.

34CrNiMo6 | 1.6582 | 4337 Engineering Steel - Otai Special ...

EN 34CrNiMo6 Steel is an important alloy engineering steel grade as per BS EN 10083-3:2006. 34CrNim06 steel has high strength, high toughness and good hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability of resistance to overheating, but the white sensitivity of 34CrNiM06 is high.

DIN 1.6582/34CrNiMo6 steel - fuhongforge

5.DIN 1.6582/34CrNiMo6 steel Forging Forging temperature: 1100 o C – 1200 o C,hold enough time for the steel to be thoroughly heated.Don’t forge below temperature 850°C.AISI 1045 steel should be cooled as slowly as possible in still air or in sand after forged.

1.6582 Alloy Engineering Steel| 34CrNiMo6 | 4337 -DIN ...

For 34CrNiMo6 / 1.6582, we can supply the steel round bar, steel flat bar, steel sheet, plate and square block. Round bar can be sawn to your required length and size. Rectangular steel pieces can be sawn from flat bar or plate to your specific sizes.

34CrNiMo6 - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. 34CrNiMo6 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

34CrNiMo6 - steelnavigator.ovako

34CrNiMo6 is a quenching and tempering steel with high strength, high toughness and good hardenability. Used for large axles, machine components, tools and high strength fasteners. The steel can be induction hardened and it is weldable under certain conditions.

EN10083 1.6582 34CrNiMo6 Hardening Steel-Heat Treatment

shunitesteel› …› Hot Forged› Hot Forged Alloy Steel BarApplications. 34CrNiMo6, it is one kind of Quench and tempering special CrNiMo steel material, characterized by high tensile strength and high toughness.

34CrNiMo6/1.6582/SAE4340/EN24 Quality Alloy Steel-Fuhong steel

34CrNiMo6/1.6582 Alloy Steel is is a heat treatable, low alloy steel containing nickel, chromium and molybdenum as per DIN Germany standard which is known for its toughness and capability of developing high strength in the heat treated condition while retaining good fatigue strength. 34CrNiMo6/1.6582 Alloy Steel is widely used in heavy duty ...

4340 / 1.6582 | Steel Bar

1.6582 / 34CrNiMo6 DIN 1.6582 / 34CrNiMo6 Steel is an important alloy engineering steel grade as per DIN Germany standard. It has high strength,high toughness and good hardenability.

34CrNiMo6 - steel-grades

34CrNiMo6 . This page provides 34CrNiMo6 datasheet, 34CrNiMo6 mechanical properties, chemical element 34CrNiMo6 , technical specifications of 34CrNiMo6 steel material properties. 34CrNiMo6 performance specifications.

34CrNiMo6 Steel | 1.6582 Alloy Structure Steel bar ...

34CrNiMo6 steel china supplier and stockholders, Otai special Steel supply of 34CrNiMo6 steel in round bar, flat bar, sheet , plate and steel block. we can saw cutting 34CrNiMo6 steel as your requirements size. 34CrNiMo6 is a alloy engineering steel, Delivery condition is Quenching and Tempered, Hardness 22 to 28HRc .

4340 Steel | 36CrNiMo4 | 1.6511 | EN24 | SNCM439 - Otai ...

AISI 4340 steel is a medium carbon, low alloy steel known for its toughness and strength in relatively large sections. AISI 4340 is also one kind of nickel chromium molybdenum steels. 4340 alloy steel is generally supplied hardened and tempered in the tensile range of 930 – 1080 Mpa.

China steel plate supplier EN 34CrNiMo6 suppliersteel ...

34CrNiMo6 steel china supplier and stockholders, Otai special Steel supply of 34CrNiMo6 steel in round bar, flat bar, sheet , plate and steel block. we can saw cutting 34CrNiMo6 steel as your requirements size. 34CrNiMo6 is a […]

EN 1.6582 (34CrNiMo6) Steel :: MakeItFrom

EN 1.6582 steel is an alloy steel formulated for primary forming into wrought products. 1.6582 is the EN numeric designation for this material. 34CrNiMo6 is the EN chemical designation. It has a moderately high electrical conductivity among EN wrought alloy steels.

MATERIAL 1.6582, STAINLESS STEEL 34CRNIMO6 - steel.shop

steel.shop. Albert-Einstein-Str. 9 D-59302 Oelde +49 2522 9370 222 +49 2522 9370 235 [email protected]

34CrNiMo6 datasheet,34CrNiMo6 chemical,34CrNiMo6 …

Technical specifications of French standards structure steel 34CrNiMo6 datasheet - 34CrNiMo6 Chemical compositions, mechanical properties from Steelmaking,ESR melted,Blooming, Forging, Hot rolling, Heat treatment, Straightening, Ultrasonic test, Cold working or Machined.

Buy High Strength Alloy Steel Aisi 4340 din 34crnimo6 ...

weiku› ProductsALLOY STRUCTURAL STEEL---AISI 4340 Similar Steel Grade-DIN/W.Nr. 1.6582, GB 34CrNiMo6 Alloy Structural Steel AISI 4340 is a heat treatable, low alloy steel containing nickel, chromium and molybdenum. It is known for its toughness and capability of...

AISI 4337/4340/ 1.6582/ 34CrNiMo6 - China AISI 4337/4340 ...

Description VCNMO150 is a heat treatable, low alloy steel containing nickel, chromium and molybdenum. It is known for its toughness and capability of developing high strength in the heat treated condition while retaining good fatigue strength.

Mat.No. 1.6582, DIN 34CrNiMo6, AISI 4337/4340 - Co., Ltd.

Mat.No. 1.6582, DIN 34CrNiMo6, AISI 4337/4340. ... This is a low alloy steel and not a corrosion resistant alloy. Protective coating should be used. Welding The alloy can be fusion or resistance welded. Preheat and post heat weld procedures should be followed when …

34CrNiMo6 Through Hardening Steel | Hillfoot

Description. 34CrNiMo6 grade steel is a general purpose steel used for a wide range of engineering parts. It is capable of being heat treated to produce a wide range of tensile strengths combined with good ductility and resistance to shock.

DIN 34CrNiMo6 datasheet,DIN 34CrNiMo6 chemical,DIN ...

Technical specifications of DIN 34CrNiMo6 hardened and tempered steel-DIN 34CrNiMo6 Chemical composition, 34CrNiMo6 mechanical properties from steelmaking,34CrNiMo6 forging, rolling, heat treatment,34CrNiMo6 cold working.We also possess advanced precision machining equipments for further processing.

Hot Products

We are here to serve you!

Reply to technical consultation Provide design solution Dispatch engineers domestically/abroad Handle complaints thoroughly Systematic training Trouble judgment &amo; removal